Kajian uji gelar aspal modifikasi berbasis karet padat jenis crepe rubber pada skala pilot

  • Bahruddin Bahruddin Universitas Riau
  • Arya Wiranata Universitas Riau
  • Eri Malindo Universitas Riau
  • Alfian Malik Universitas Riau
  • Robby Kumar Balai Pengembangan Produk dan Standarisasi Industri, Pekanbaru
Keywords: asphalt, crepe rubber, industry, modified asphalt degrer test, natural rubber

Abstract

The COVID-19 pandemic that hit Indonesia had a significant impact on the industrial sector. One of them is the natural rubber industry which has experienced a decline due to export restrictions from natural rubber export destination countries. This has a direct impact on rubber farmers who suffer financial losses. The formation of a new natural rubber downstream industry for natural rubber modified asphalt is a solution to increase national rubber consumption without relying on exports. Therefore, the purpose of carrying out the asphalt title test based on natural rubber type crepe rubber is to evaluate technical feasibility and educate the public about using natural rubber for domestic needs. This service method consists of several stages: observing the absorption potential of natural rubber, analyzing technical feasibility, and evaluating the degree test of natural rubber modified asphalt. The degree test was carried out on the 10-meter road around the Faculty of Engineering, Riau University. The results of the degree test show that the modified asphalt raw material is based on crepe rubber, the asphalt sample marshall test that was held, and the core drill test meets the 2018 Highways standard. The degree test that has been carried out can educate the community and rubber farmers through APKARKUSI regarding natural rubber processing technology and compound making. Crepe rubber and the technology of making modified asphalt and applying modified asphalt for roads.

Downloads

Download data is not yet available.

References

Abdurrohim, Y., & Setyawan, A. (2017). Pembuatan Job Mix Formula Untuk Porus Aspal Dan Evaluasi Campuran Dari Penerapan Pada Jalan Lingkungan. 1296.
Badan Pusat Statistik. (2019). Statistik Karet Indonesia 2019. 1-134.
Bahruddin, Wiranata, A., & Malik, A. (2021). Effects of 1,2-dihydro-2,2,4-trimethyl-quinoline (TMQ) antioxidant on the Marshall characteristics of crepe rubber modified asphalt. Key Engineering Materials, 876 KEM, 39-44.
deplantation. (2020). Analisis Kinerja dan Prospek Komoditas Karet. Radar: Opini Dan Analisis Perkebunan, 1(2), 1-12.
Direktorat Industri Hasil Hutan dan Perkebunan Kementrian Perindustrian. (2018). Business Plan Industri Aditif Aspal Karet.
Direktorat Jenderal Bina Marga. (2018). Spesifikasi Umum Bina Marga 2018 untuk Pekerjaan Jalan dan Jembatan (General Specifications of Bina Marga 2018 for Road Works and Bridges). September.
Ebrahim Abu El-Maaty, A. (2017). Temperature Change Implications for Flexible Pavement Performance and Life. International Journal of Transportation Engineering and Technology, 3(1), 1.
Eka Putri, E., & Vasilsa, O. (2019). Improve the Marshall stability of porous asphalt pavement with HDPE addition. MATEC Web of Conferences, 276, 03005.
Gapkindo. (2020a). Asphalt Rubber Program and its Challenges for Downstreaming Industry. GAPKINDO. https://gapkindo.org/2021/06/10/asphalt-rubber-program-and-its-challenges-for-downstreaming-industry/
Gapkindo. (2020b). This year, The Absorption of Natural Rubber is Projected to Only 550,000 Tons. GAPKINDO. https://gapkindo.org/2020/12/15/this-year-natural-rubber-absorption-is-projected-to-only-550000-tons/
Ibrahim, B., Syahza, A., Bakce, D., Irdoni, Amraini, S. Z., Zahrina, I., Faddillah, I., Wiranata, A., & Syoffinal. (2020). Pengembangan Tahap Awal Industri Hilir Karet di Kabupaten Kuantan Singingi. 3, 123-128.
Ibrahim, B., Wiranata, A., & Malik, A. (2020). The effect of addition of antioxidant 1,2-dihydro-2,2,4-trimethyl-quinoline on characteristics of crepe rubber modified asphalt in short term aging and long term aging conditions. Applied Sciences (Switzerland), 10(20), 1-23.
Jauhari, B., & Doda, N. (2019). Pengaruh gradasi agregat terhadap nilai karakteristik aspal beton (ac-bc). Gorontalo Journal of Infrastructure and Science Engineering, 2(1), 27.
Marjono. (2013). Pengaruh Jumlah Lintasan Terhadap Tebal, Berat Isi, Stabilitas Dan Kelelahan Lapisan Tipis Aspal Beton Untuk Jalan Raya. PROKONS Jurusan Teknik Sipil, 7(1), 19.
Mistry, R., & Roy, T. K. (2020). Predicting Marshall stability and flow of bituminous mix containing waste fillers by the adaptive neuro-fuzzy inference system. Revista de La Construccion, 19(2), 209-219.
Nuryono, B., & Kurniawan, H. (2018). Analisis Pengaruh Variasi Jumlah Lintasan Terhadap Kepadatan Campuran Aspal Beton. Isu Teknologi STT Mandala, 13(1), 72-77.
Pais, J. C., Amorim, S. I. R., & Minhoto, M. J. C. (2013). Impact of traffic overload on road pavement performance. Journal of Transportation Engineering.
Siswanto, H., Supriyanto, B., Pranoto, Chandra, P. R., & Hakim, A. R. (2017). Marshall properties of asphalt concrete using crumb rubber modified of motorcycle tire waste. AIP Conference Proceedings.
Siswoyo, S., & Yamali, F. R. (2018). Pemadatan Lapangan Asphalt Concrete Binder Course (Ac-Bc) Pada Pembangunan Jalan Simpang Karya Mukti Kabupaten Batanghari. Jurnal Talenta Sipil, 1(1), 30.
White, G. (2016). The Impact of Rainfall During Asphalt Paving Operations -Technical Note. The International Journal of Pavement Engineering and Asphalt Technology (PEAT), 17(2), 21-27.
Published
2021-11-18
How to Cite
Bahruddin, B., Wiranata, A., Malindo, E., Malik, A., & Kumar, R. (2021). Kajian uji gelar aspal modifikasi berbasis karet padat jenis crepe rubber pada skala pilot. Unri Conference Series: Community Engagement, 3, 602-610. https://doi.org/10.31258/unricsce.3.602-610