Pembuatan paving blok geopolimer dari limbah abu terbang batu bara (Fly Ash) di Kelurahan Pematang Kapau Tenayan Raya Pekanbaru

  • Aman Aman Universitas Riau
  • Amun Amri Universitas Riau
Keywords: fly ash, geopolimer, activator solution, compressive strength

Abstract

The use of coal as fuel for PLTU Tenayan Raya Pekanbaru produces waste in the form of fly ash and bottom ash. Fly ash has high silica and alumina content which has the potential to replace cement. The resulting fly ash is partly not utilized and is piled up in the ash disposal area and has the potential to cause water and soil pollution. The increasing use of coal, the environmental burden will be heavier and needs to be anticipated by finding optimal utilization of coal fly ash waste. Based on the description above, community service activities have been carried out in Pematang Kapau Village, Tenayan Raya Pekanbaru District in the form of socialization and training on the use of fly ash waste as a material for making geopolymer paving blocks without using portland cement which has been used in the process of making paving blocks and other building materials. From the results of the above training activities obtained geopolymer paving blocks with specifications rectangular shape with a length of 21 cm, width 10 cm and height 8 cm, gray color and the test results obtained compressive strength of 40.87 MPa into SNI quality standard A.

Downloads

Download data is not yet available.

References

Alvarez, E. Ayuso. 2008. Environmental, physical and structural characterization of geopolymer matrixes synthesized from coal (co-) combustion fly ashes, J.Hazard Matter Vol.154 page 175-183.

Biro Perencanaan Kementerian Perindustrian Republik Indonesia 2012. Perencanaan Kebutuhan Energi Sektor Industri dalam Rangka Akselerasi Industrialisasi.

Budyanto, H. 2012. Pemanfaatan abu sisa PLTU (Fly ash dan bottom ash) dan Pasir sisa Tambang (Tailing) untuk pembuatan bata beton pejal yang aman bagi lingkungan, Tesis UNDIP.

Ciptaningtyas A. L. 2017. https://ekonomi.bisnis.com/read/20170228/44/632401/pltu-tenayan-kapasitas-2x110-mw-telah-beroperasi Diakses pada tanggal 7 Jul 2019.

Ekaputri, J. Triwulan. 2013. Sodium sebagai aktivator fly ash ,Trass dan Lumpur Sidoarjo dalam beton geopolimer, Jurnal Teknik Sipil Vol.20 ISSN 0853-2982.

Hardjito, D., and B.V.Rangan. 2004. Fly ash-Based Geopolymer Concrete Construction Material for Sustainable Development” , invited paper, Concrete World: Engineering and Materials, American concrete Institute, India Chapter, Mumbai, India.

Hardjito, D., and B.V.Rangan. 2004. Properties of Geopolymer Concrete with fly ash as Source Material: Effect of Mixture Composition”, Seventh CANMET/ACI International Conference on Recent Advance in Concrete Technology, Las Vegas, USA.

Irawan. 2009. Metodelogi Penelitian Kualitatif “ Analisis data “ cetakan ke-3 Rajawali Press , Jakarta.

Mishra, A., and Choudhary. 2000. Effect of concentration alkalyn liquid and curing time on strength and water absorption of geopolymer concrete, ARPN Journal of Engineering and Applied sciences Vol.3 no.1 p.87-93.

Muniz , Bergna J . 2011. The effect of temperature on the geopolymerization process of a metakaolin-based geopolymer. Materials Letters, 65(6),995-998.

Olivia, M., Putri., Damayanti. 2014. Parametric Study on the compressive strength of Palm Oil Fuel Ash (POFA) Geopolymer mortar. The International Conference on Environmentally Friendly Civil Engineering Construction and Material, Manado Indonesia.

Samadhi, T.W dan Pratama, P.P. 2013. Synthesis of Geopolymer from Indonesian Kaolin and Fly Ash as a Green Construction Material, AUN/SEED-Net Regional Conference on Chemical Engineering, Pattaya, Thailand.

Published
2019-09-27
How to Cite
Aman, A., & Amri, A. (2019). Pembuatan paving blok geopolimer dari limbah abu terbang batu bara (Fly Ash) di Kelurahan Pematang Kapau Tenayan Raya Pekanbaru. Unri Conference Series: Community Engagement, 1, 223-227. https://doi.org/10.31258/unricsce.1.223-227